NEC Univerge SV8100 - Page 651

UNIVERGE SV8100 Issue 5.0
Line Preference 1 - 641
Operation
Ringing Trunk or intercom (ICM) call:
Lift the handset or press Speaker.
.
The setting assigned for Program 15-02-10 and Program 22-01-01 determines which call is answered first.
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to ring groups.
Auto-Answer for Non-Ringing
Lines only works for trunks that do
not ring an extension.
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
22-05-01 Incoming Trunk Ring Group
Assignment
Assign trunks to ring groups. Auto-
Answer for Non-Ringing Lines only
works for trunks that do not ring an
extension.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or InMail)
(default = 1)
23-03-01 Universal Answer/Auto Answer Use this program to let an
extension user automatically
answer trunk calls that ring other
extensions. When the user lifts the
handset, they automatically
answer the ringing calls based on
Trunk Group Routing
programming (defined in Program
14-06).
Maximum eight digits
Day/Night Mode
1~8
Route Table Number
0~100
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data