NEC Univerge SV8100 - Page 660

Issue 5.0 UNIVERGE SV8100
1 - 650 Loop Keys
15-07-01 Programmable Function Keys Program function keys as trunk
group/loop keys (*02 or *05). For
additional data, enter 0 (incoming
only), 1 (outgoing only) or 2 (both
ways). Use Programs 15-13-01 or
15-13-02 to define the trunk
groups used.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
15-13-01 Loop Keys - Outgoing Option Assign trunk groups for outgoing
loop keys (0=ARS, Trunk Groups
1-100). Selecting “0” for ARS
should only be used when ARS is
enabled in Program 26-01-01 or it
could cause the loop key to
lock up.
0-100
(0 = Assigns the Loop
Key for ARS,
1-100 = Assigns the
Loop Key to the trunk
group specified)
(default = 0:
Programming Function
Key No. - 01-48)
15-13-02 Loop Keys - Incoming Option Assign trunk groups for incoming
loop keys
0-100
(0 = Assigns the Loop
Key to all trunk groups)
1-100 = Assigns the
Loop Key to the trunk
group specified)
(default = 0:
Programming Function
Key No. - 01-48)
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
If an extension should be able to
use Programmable Functions
Keys to program a loop key,
enable this option in the user’s
Class of Service (1-15).
0 = Off
1 = On
(default = 1 for COS
01~15)
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to Ring Groups.
An incoming loop key will ring only
for those trunks programmed
to ring. Also see Program 22-05.
Maximum eight digits
Default:
Extensions 200 (first
port) ring for incoming
Ring Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
22-05-01 Incoming Trunk Ring Group
Assignment
Assign trunks to Ring Groups. An
incoming loop key will ring only for
those trunks programmed
to ring. Also see Program 22-04
above.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or InMail)
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data