NEC Univerge SV8100 - Page 686

Issue 5.0 UNIVERGE SV8100
1 - 676 Message Waiting
Related Features
Handsfree Answerback/Forced Intercom Ringing
Hotel/Motel
Programmable Function Keys
InMail
Voice Response System (VRS)
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-10-16 Service Code Setup (for System
Administrator) – Leaving
Message Waiting (Requires CPU
to be licensed for Hotel/Motel)
Use to customize the leave
message waiting Service Codes
(requires CD-CP00 to be licensed
for Hotel/Motel).
MLT
(default = 726)
11-11-09 Service Code Setup (for Setup/
Entry Operation) – Answer
Message Waiting
Use to customize the answer
message waiting service code.
MLT, SLT
(default = 841)
11-11-10 Service Code Setup (for Setup/
Entry Operation) – Cancel All
Messages Waiting
Used to customize the Cancel All
Messages Waiting service code.
MLT, SLT
(default = 873)
11-11-11 Service Code Setup (for Setup/
Entry Operation) – Cancel
Message Waiting
Use to cancel message waiting
used for registration and setup.
MLT, SLT
(default = 871)
11-16-07 Single Digit Service Code Setup
– Message Waiting
Customize the message waiting
Service Codes used to set
message waiting when a busy or
ring back signal is heard.
(default not assigned)
15-02-28 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Color
Determine whether an extension
Message Waiting Lamp lights
Green (0) or Red (1) when a
message is received.
0 = Green
1 = Red
(default = 1)