NEC Univerge SV8100 - Page 687

UNIVERGE SV8100 Issue 5.0
Message Waiting 1 - 677
15-02-35 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Calling Extension
Select the cycle method that the
Large LED flashes when the
extension has set Message
Waiting.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 7)
15-02-36 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Called Extension
Select the cycle method that the
Large LED flashes when the
extension has Message Waiting
set to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
15-02-37 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Color
This option allows you to select
the Message Waiting flash pattern
for the station that set the
Message Waiting reminder.
0 = Green
1 = Red
(default = 1)
15-02-38 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Cycle
Select the cycle method that the
Large LED flashes when the
extension has a VM Message
Waiting set to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
15-07-01 Programmable Function Keys Assign a function key for Message
Waiting (code 38).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-13-07 Class of Service Options
(Supplementary Service) –
Message Waiting
Turns Off (0) or On (1) an
extension ability to leave Message
Waiting.
0 = Off
1 = On
(default = 1 for
COS 1~15)
80-01-01
(48)
Service Tone Setup – Repeat
Count
Set repeat count for tone 16
Lockout.
default = 0 (endless).
Program
Number
Program Name Description/Comments Assigned Data