NEC Univerge SV8100 - Page 722

Issue 5.0 UNIVERGE SV8100
1 - 712 Music on Hold
14-08-01 Music on Hold Source for Trunks
– MOH Type
For each trunk, set the Music on
Hold source.
0 = Internal/External
MOH
1 = Customer Provided
Source Connected to
BGM Port
2 = Customer Provided
Source Connected to
ACI Port
(default = 0)
14-08-02 Music on Hold Source Port
Number – Source Port Number
If the MOH type is 2 in Program
14-08-01, for each trunk enter the
ACI source port number (1~96).
Source port 0-96
(default = 0)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-07-02 Class of Service Options
(Administrator Level) –
Changing the Music on Hold
Tone
Turn off or on an extension ability
to change the Music on Hold tone.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
22-11-09 DID Translation Number
Conversion – Music On Hold
Source
For each DID Translation Table
entry (1~2000), specify the source
of music to be used for DID trunks.
0 = IC/MOH Port
1 = BGM Port
2 = ACI Port
(default = 0)
22-11-10 DID Translation Number
Conversion – ACI Music Source
Port
For each DID Translation Table
entry (1~2000), if item 2 is
selected in Program 22-11-09,
specify the port to be used for the
source of music heard on DID
trunks.
When a sound source
type is 2 in above :
(0~96)
(default = 0)
80-01-01 Service Tone Setup – Music On
Hold Tone (Service Tone 64)
Used to customize the repeat
count for the musing on hold tone
if Program 10-01-01 is set to 2.
0~255 (0=Until
On-Hook)
(Default 0)
80-01-02 Basic Tone Number Used to customize the basic tone
number for the musing on hold
tone if Program 10-01-01 is set to
2.
1~33
(0 = No Tone)
(33=Default Time Slot)
80-01-03 Duration Count Used to customize the duration
count for the musing on hold tone
if Program 10-01-01 is set to 2.
1~255 (100~25500ms)
Program
Number
Program Name Description/Comments Assigned Data