NEC Univerge SV8100 - Page 723

UNIVERGE SV8100 Issue 5.0
Music on Hold 1 - 713
When Using a PGD(2)-U10 ADP:
80-01-04 Gain Level (dB) Used to customize the Gain Level
for the musing on hold tone if
Program 10-01-01 is set to 2.
1~63 (-15.5 ~ +15.5)
Program
Number
Program Name Description/Comments Assigned Data
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
If a PGD(2)-U10 ADP is used for
the external music source, the
module is automatically assigned
type 9 if the jumper straps in the
module were set prior to
connecting it to the system. If
another type was assigned,
disconnect the PGD(2)-U10 ADP
from the system, delete the type
setting, and, with the jumper
straps positioned correctly in the
PGD(2)-U10 ADP, reconnect the
module to the system. Refer to
the UNIVERGE SV8100 System
Hardware Manual for the jumper
strap settings.
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
11-06-01 ACI Extension Numbering Each ACI port must be assigned
an extension number. Use this
program to assign the extension
numbers to ACI software ports.
Select a number outside of the
normal extension number range.
ACI Ports: 1~96
(default not assigned)
11-08-01 ACI Group Pilot Number Assign pilot numbers to ACI
groups. When a user dials the pilot
number, they reach an available
ACI software port within the group.
ACI Groups: 1~16
(default not assigned)
33-01-01 ACI Port Type Setup Set each ACI software ports for
input (1) or input/output (2). Use
input ports for Music on Hold
sources. Use output ports for
External Paging/Ringer Control.
ACI Ports: 1~96
ACI Types:
0 = None
1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
Program
Number
Program Name Description/Comments Assigned Data