Issue 5.0 UNIVERGE SV8100
1 - 730 Night Service
20-07-01 Class of Service Options
(Administrator Level) – Manual
Night Service Enabled
Turns Off (0) or On (1) an
extension for manually Switching
the Night Mode (Service Code
718). This option must be enabled
for an extension to be able to
display the Night indication.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
Turns Off (0) or On (1) an
extension to use Universal Auto
Answer (no service code
required).
0 = Off
1 = On
(default = 0 for
COS 1~15)
22-02-01 Incoming Call Trunk Setup Assign the incoming trunk type for
each trunk. There is one item for
each Night Service Mode (1~8).
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
22-04-01 Incoming Extension Ring Group
Assignment
To have trunks ring extensions
during the different Night Service
modes (for ANA), assign
extensions to Ring Groups. For
each extension in the Ring Groups
(1~100), indicate in Program
22-06-01 if trunk should ring (1) or
not ring (0).
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
22-05-01 Incoming Trunk Ring Group
Assignment
To have trunks ring extensions for
ANA, assign trunks to Ring
Groups (1~100), You make a
different entry for each Night
Service mode.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or InMail)
(default = 1)
22-08-01 DIL/IRG No Answer Destination If a Universal Answer call rings
longer than the DIL No Answer
Time (Program 22-01-04), it routes
to the Ring Group specified in this
option
.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or InMail)
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data