NEC Univerge SV8100 - Page 751

UNIVERGE SV8100 Issue 5.0
One-Touch Calling 1 - 741
Guide to Feature Programming
Operation
Programmable Function Keys
To define a Programmable Function Key as a One-Touch Key:
1. Dial the service code for Function Key Programming (Program 11-11-17, 851 by default).
2. Press the key to be defined.
Program
Number
Program Name Description/Comments Assigned Data
15-07-01 Programmable Function Keys Define a Programmable Function
Key for One-Touch Calling by
defining the key as a DSS/
One-Touch key (01).
For Line Keys: 1~48
0 ~ 99 (Normal
Function Code)
(default = Service
Code 851)*
00
* ~ *99
(Appearance Function
Code) (default =
Service Code 852)
11-11-17 Service Code Setup (for Setup/
Entry Operation)
–
Programmable Function Key
Programming (2-Digit Service
Codes)
Use this option to set the service
code (default 851) to assign 2-digit
function codes to the Function
keys.
MLT
(default = 851)
20-13-18 Class of Service Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
Turns Off (0) or On (1) an
extension user ability to program
General function keys using
Service Code 851 (by default).
(Refer to Program 20-07-10 for
Service Code 852.)
0 = Off
1 = On
(default = 1 for
COS 1~15)
30-03-01 DSS Console Key Assignment Customize DSS Console keys to
function as DSS keys, Service
Code keys, Programmable
Function Keys, and One-Touch
Calling keys.
When programming a feature
within a One-Touch Key, refer to
the feature description for
additional programming options.
Key Number
001~500
0~99 (General
Functional Level)
97 = Door Box Access
key (additional data:
1~8 Door Box No.)
* 00 ~ * 99
(Appearance
Functional Level)