NEC Univerge SV8100 - Page 791

UNIVERGE SV8100 Issue 5.0
Park 1 - 781
Operation
To Park a call in a system orbit:
.
You can Park Intercom or trunk calls.
1. Press the Park key (Program 15-07 or SC 852: *04 + orbit).
The Park key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce call.
24-01-02 System Options for Hold – Hold
Recall Callback Time
A trunk recalling from Hold or Park
rings an extension for this time.
After this time the system invokes
the Hold recall time again. Cycling
between Hold recall time and
callback time and normal or
extended (Recall) Park Hold time
continues until a user answers the
call.
0~64800 (seconds)
(default = 30)
24-01-06 System Options for Hold – Park
Hold Time - Normal
Set the Park Hold Time. A call left
parked longer than this time
recalls the extension that initially
parked it.
0~64800 (seconds)
(default = 90 seconds)
24-01-07 System Options for Hold – Park
Hold Time - Extended (Recall)
Set the Extended Park Hold Time.
A call left parked longer than this
time recalls the extension that
initially parked it.
0~64800 (seconds)
(default = 300
seconds)
24-03-01 Park Group – Park Group
Number
Assign an extension to a Park
Group (01~64). An extension user
can pick up only a call parked by a
member of their own Park Group.
1~64
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data