NEC Univerge SV8100 - Page 838

Issue 5.0 UNIVERGE SV8100
1 - 828 Repeat Redial
Related Features
Automatic Route Selection
Central Office Calls, Placing
Last Number Redial
Save Number Dialed
Single Line Telephones
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
15-07-01 Programmable Function Keys Assign a function key for Repeat
Redial (code 29).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
Turns Off (0) or On (1) an
extension to use Repeat Redial.
0 = Off
1 = On
(default = 1 for
COS 1~15)
21-08-01 Repeat Dial Setup – Repeat
Redial Count
Set how many times Repeat
Redial automatically repeats if the
call does not go through.
0~255
(default = 3)
21-08-02 Repeat Dial Setup – Repeat
Redial Interval Time
Set the interval between Repeat
Redial attempts.
0~64800 (seconds)
(default = 60)