NEC Univerge SV8100 - Page 901

UNIVERGE SV8100 Issue 5.0
SLT Adapter 1 - 891
20-08-02 Class of Service Options
(Outgoing Call Service) – Trunk
Outgoing Calls
Turns off (0) or on (1) outgoing
trunk calling for the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-03 Class of Service Options
(Outgoing Call Service) – System
Speed Dialing
Turns Off (0) or On (1) an
extension ability to make outbound
calls using system speed dial
numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-04 Class of Service Options
(Outgoing Call Service) – Group
Speed Dialing
Turns Off (0) or On (1) an
extension ability to make outbound
calls using group speed dial
numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
Turn off or on an extension ability
to use Dial Number Preview.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
Turn off or on Toll Restricting
Override (Service Code 663).
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
Turns Off (0) or On (1) an
extension to use Repeat Redial.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-08 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Dial Block
Turn off or on an extension ability
to use Dial Block.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
Turn off or on Ringdown Extension
for extensions with this COS.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
Turns Off or On an extension
allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom
calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice
announce mode.
0 = Off
1 = On
(default = 0 for
COS 1~15)
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
Turn off or on an extension ability
to use Department Group Step
Calling.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data