NEC Univerge SV8100 - Page 923

UNIVERGE SV8100 Issue 5.0
Speed Dial – System/Group/Station 1 - 913
15-07-01 Programmable Function Keys Assign a function key for System
Speed Dialing (27) or Group
Speed Dialing (28). You can
program the key as either a
general Speed Dialing key or you
can choose to store a bin number
with the function key. This key
would then always dial the
associated bin number. If storing a
bin number along with the code,
do not store 0, 00 or 000. To
bypass entering a bin number,
press Hold (Hold is also required
if programming the function key
using the service code 851).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
15-14-01 Programmable One-Touch Keys
– Station Speed Dial Data
Assign the extensions Speed Dial
number (1~10).
1~0, *, #, Pause,
Hookflash,
@ (Code
for Answer-Wait)
Up to 24 digits
(default not assigned)
15-14-02 Programmable One-Touch Keys
– Station Speed Dial Name
Assign the name associated with
the extension Speed Dial Bin
(1~10).
Name
(default not assigned)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-07-04 Class of Service Options
(Administrator Level) – Storing
Speed Dialing Entries
Turns Off (0) or On (1) an
extension to store System or
Group Speed Dialing numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-03 COS Options (Outgoing Call
Service) – System Speed Dialing
Turns Off (0) or On (1) an
extension ability to make outbound
calls using system speed dial
numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-08-04 COS Options (Outgoing Call
Service) – Group Speed Dialing
Turns Off (0) or On (1) an
extension ability to make outbound
calls using group speed dial
numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Program
Number
Program Name Description/Comments Assigned Data