NEC Univerge SV8100 - Page 922

Issue 5.0 UNIVERGE SV8100
1 - 912 Speed Dial – System/Group/Station
13-04-08 Memo 1 Define Memo Display information
tied to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 1.
Maximum of 28 digits.
(default - not assigned)
13-04-09 Memo 2 Define Memo Display information
tied to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 2.
Maximum of 28 digits.
(default - not assigned)
13-04-10 memo 3 Define Memo Display information
tied to Common Speed Dial bin or
Telephone Book which match with
incoming Caller ID. This will be
displayed in LCD Line 3.
Maximum of 28 digits.
(default - not assigned)
13-04-11 Mailbox Number Per Speed Dial Bin No.
(0000~1999), set the voice mail
box number. Incoming Caller ID
number will be checked with
Speed Dial Data (PRG 13-04-01).
From matched Speed Dial Bin No.,
the system finds the voice mail
box number according to this
PRG.
0~544
Station Mail Box (512)
+
Group Mail Box (32) =
544
(default - not assigned)
13-05-01 Speed Dialing Trunk Group –
Trunk Group Number
For each System Speed Dialing
number, enter the routing option
Trunk Group Number (1~100) to
dial out on.
0~100
(default not assigned)
14-02-06 Analog Trunk Data Setup –
Pause at 1st digit after Line
Seize in Manual Dial Mode
Enable/disable the system ability
to pause after dialing the first digit.
0 = No Pause (No)
1 = Pause (Yes)
(default = 1)
15-02-04 Multiline Telephone Basic Data
setup – Redial (Speed Dial )
Control
Assign the extension Redial key
for either Common (0) or Group
(1) Speed Dialing.
0 = Common and
Individual Speed
Dialing
1 = Group Speed
Dialing
(default = 0)
15-02-58 Display Mode of Incoming Trunk On receipt of caller ID matching
abdial location defines whether the
caller ID and name or memo
entries are displayed initially
0 = Caller ID
1 = Memo Information
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data