NEC Univerge SV8100 - Page 929

UNIVERGE SV8100 Issue 5.0
Speed Dial – System/Group/Station 1 - 919
Operation
To store an Speed Dialing number (display telephones only):
1. Press Speaker.
2. Dial 853 (for system) or 854 (for group).
3. Dial system or group storage code.
. Initially, there are 1000 System Speed Dialing codes. There are Group Speed Dialing codes only if you define
them in programming.
4. Dial telephone number you want to store (up to 24 digits).
. Valid entries are 0~9, # and *. To enter a pause, press Transfer. To store a Flash, press Recall.
. Enter @ for await answer before sending following digits on ISDN.
5. Press Hold.
6. Enter the name associated with the Speed Dialing number.
80-04-08 Call Progress Tone Detector
Setup – OFF minimum time
Use to define the off minimum time
for the Call Progress Tone
Detector.
1~255 (30+30-
7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 9
(300ms)
Type 3 (RBT) – 83
(2520ms)
Type 4, Type 5 – 0
80-04-09 Call Progress Tone Detector
Setup – OFF maximum time
Use to define the off maximum
time for the Call Progress Tone
Detector.
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 14
(450ms)
Type 3 (RBT) – 115
(3480ms)
Type 4, Type 5 – 0
Program
Number
Program Name Description/Comments Assigned Data