NEC Univerge SV8100 - Page 928

Issue 5.0 UNIVERGE SV8100
1 - 918 Speed Dial – System/Group/Station
80-04-03 Call Progress Tone Detector
Setup – S/N Ratio
Use to define the S/N ratio for the
Call Progress Tone Detector.
0~4 (0dB ~ -20dB)
default:
Type 1 (DT) – 4
(-20dB)
Type 2 (BT) – 4
(-20dB)
Type 3 (RBT) – 4
(-20dB)
Type 4, Type 5 – 0
80-04-04 Call Progress Tone Detector
Setup – No tone time
Use to define the no tone time for
the Call Progress Tone Detector.
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 132
(3990ms)
Type 2 (BT) – 132
(3990ms)
Type 3 (RBT) – 132
(3990ms)
Type 4, Type 5 – 0
80-04-05 Call Progress Tone Detector
Setup – Pulse Count
Use to define the pulse count for
the Call Progress Tone Detector.
1~255
default:
Type 1 (DT) – 1
Type 2 (BT) – 1
Type 3 (RBT) – 1
Type 4, Type 5 – 0
80-04-06 Call Progress Tone Detector
Setup – ON minimum time
Use to define the on minimum time
for the Call Progress Tone
Detector.
1~255 (30+30-
7680ms)
default:
Type 1 (DT) – 9
(300ms)
Type 2 (BT) – 9
(300ms)
Type 3 (RBT) – 25
(780ms)
Type 4, Type 5 – 0
80-04-07 Call Progress Tone Detector
Setup – ON maximum time
Use to define the on maximum
time for the Call Progress Tone
Detector.
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 0
Type 2 (BT) – 14
(450ms) [ET]
Type 3 (RBT) – 40
1230ms)
Type 4, Type 5 – 0
Program
Number
Program Name Description/Comments Assigned Data