Issue 5.0 UNIVERGE SV8100
1 - 924 Speed Dial – System/Group/Station
To dial a Station Speed Dialing number (Multiline Terminal):
1. Press Speaker.
2. Dial 761 (default Service Code).
- OR -
Press the System Speed Dialing key (Service Code 851: 27).
. To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Station Speed Dial buffer number (0 ~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
: : : : : : :
0 = Station Speed Dial buffer 10
. The stored number dials out.
. Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may optionally select a
specific Trunk Group for the call.
. If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
To dial a Station Speed Dialing number (Single Line Telephone):
1. Lift the Handset.
2. Station Speed Dial 761
Group Speed Dial 814
System Speed Dial 813
3. Dial the Speed Dial Memory Location.
Station Speed Dial 0~9
Group Speed Dial xxx (none at default)
System Speed Dial 000~999
4. Converse.
To Next Page
Loading...
