Subscriber Template Overview 147
Enabling Live Monitor
The live monitor feature must be licensed. It enables subscribers to listen to a message as it is being recorded in their
mailbox. The phone system and the subscriber’s extension must be configured properly to monitor messages as they
are being recorded.
Refer to “Configuring live monitor” and “Configuring the phone system integration” chapters in the Installation Guide for
instructions.
To enable live monitor
By default, live monitor is disabled for subscribers on the default subscriber template. Use the following procedure to
use live monitor.
1. In the Navigation Pane, click Subscribers > Subscriber Template > Access Options.
For detailed field information, see the Subscriber Template > Subscriber Template > Access Options table.
2. In the Administration section, select Enable Live Monitor.
3. Click Save.
4. Enable live monitor for any previously existing subscribers.
Related Topics
Selecting Default Subscriber Access Options
Subscriber Template Overview
To Next Page
Loading...
