NEC Univerge UM8000 - Configuring Auto-Log On for Hotel Guests; To enable auto-log on; To disable auto-log on

To Next Page

To Previous Page

Hospitality Site Configuration 269

Configuring Auto-Log On for Hotel Guests

When auto-log on is enabled, hotel guests do not need to enter a personal ID or password when they access their voice

mailbox from their rooms.

NOTE

THE AUTO-LOG ON FEATURE IS AVAILABLE ONLY TO SUBSCRIBERS WHO ARE HOTEL GUESTS. THIS FEATURE IS DISABLED BY DEFAULT.

To enable auto-log on

1. In the Navigation Pane, click System > Switch > Switch Information.

2. Add hlog=1 to the Integration options field.

3. Click Save.

To disable auto-log on

1. In the Navigation Pane, click System > Switch > Switch Information.

2. Replace hlog=1 with hlog=1 or remove the hlog=1 from the Integration options field.

3. Click Save.

CAUTION!

WHEN YOU REMOVE hlog=1 FROM THE Integration options FIELD, YOU MUST RESTART THE MESSAGING SYSTEM.

4. Restart the messaging system software.

Other manuals for NEC Univerge UM8000