System Overview 26
To configure a default passwords
1. In the Navigation Pane, click Subscribers > Account Policy.
The Security Settings page appears.
2. To require subscribers to set a security code, clear the Permit blank password check box.
3. To require a minimum number of characters in a security code, select Minimum number of characters in
password, then type the number in the text box.
4. In the Default password for each new subscriber field, type a different code. The password must be 3-9 digits
in length.
5. Click Save.
To limit the number of times a caller can enter an invalid system ID
1. In the Navigation Pane, click System > Configuration > General.
2. In the Maximum number of attempts to enter a personal ID field, set the maximum number of times a caller
can enter an invalid system ID. The default is ten.
3. In the Maximum security code/password attempts field, set the maximum number of times a subscriber can
incorrectly enter a security code before having to reenter a valid system ID. The default number is one.
4. In the Callers entering a bad ID will be rerouted to field, type the system ID a caller is transferred to when the
caller enters the maximum number of invalid IDs.
5. Click Save.
Related Topics
Following Recommended Security Practices
Assigning System Manager Status
Understanding System and Personal IDs
To Next Page
Loading...
