NEC Univerge UM8000 - Configuring Fax Ports and Fax Station Numbers; To configure a fax port status and station number

Fax Mail Configuration Steps 297
Configuring Fax Ports and Fax Station Numbers
Configure each fax port, setting how the port is used to answer or dial calls. Use a combination of fax port settings to
meet the needs of the organization. For example, dedicate a fax port to sending faxes, receiving faxes, or both. How
the fax ports are configured depends on how often the ports are used to deliver fax mail and how often the ports must
support incoming fax traffic.
WARNING!
THERE ARE NUMEROUS HARDWARE AND SOFTWARE CONFIGURATIONS TO ENABLE FAX IN THE MESSAGING SYSTEM. IF YOUR SYSTEM
REQUIRES MORE THAN THE DEFAULT SETTINGS, CONTACT TECHNICAL SUPPORT OR PROFESSIONAL SERVICES PS@ACTIVEVOICE.COM) FOR
ASSISTANCE CONFIGURING THE FAX.
To configure a fax port status and station number
1. Click Switch > Switch > Switch Extensions.
2. Double-click the fax port to configure.
3. Select how the fax port is used to answer incoming calls or dial outgoing calls in the Status list.
4. Type the fax port phone number in the Extension field.
5. Click Save.
Related Topics
Fax Mail Configuration Steps
Configuring Delivery Retry Settings
Understanding Fax Delivery Retry Settings