Nedap uPASS Access - Output message format

uPASS Access | installation guide
27/
33
5.3.2 Output message format
Configure output message format.
Figure 17: Output message format settings
The serial output message format is configurable:
<prefix> [<tagstatus>] [<epclen>] [<epc>] [<datlen>] [<data>] <suffix> [ CR/LF ]
Example output:
40010257CB21DD0E34244E103FFFC809A862A1EC1500<CR><LF>
Customized example
Output:
X012345<CR><LF>
Notes
• When the output message format is changed, identified tags may no longer be shown in the UHFTOOL.