uPASS Access | installation guide
5/
1.2 Supported tags
Any EPC Class 1 Gen 2 tag is supported by the uPASS Access.
NEDAP formatted UHF tags can have the following formats:
• NEDAP UHF Wiegand tags
These tags will contain all Wiegand information including facility code and parity bits. All Wiegand formats can be
supported. The reader transparently sends this information via the Wiegand outputs. There is no need to change
any DIP-switches or configuration settings. See chapter 3.2.3 for wiring details.
• NEDAP UHF Magstripe tags
These tags will contain all magstripe information. The reader transparently sends this information onto the
magstripe interface. There is no need to change any DIP-switches or configuration settings. See chapter 3.2.4 for
wiring details.
• NEDAP UHF XS tags
These tags are especially programmed in the same format as our TRANSIT tags (Compact-Tag, Window-Button
and Heavy-Duty-Tag). The tags will have a customer-code and id-number.
The reader will modulate the tag-info onto the Nedap antenna interface output, which can be connected to NEDAP
AEOS access control hardware such as the AP1001.
To Next Page
Loading...
