Neptune E-CODER R900i - Initiating RF Activated Data Logging; Figure 23 - Start Button; Figure 24 - E-CODER )R900 I Listens for Data

Initiating RF Activated Data Logging
Follow these steps to initiate data logging.
1. Click START to initiate RF-activated data logging.
Figure 23 – Start Button
The R900 BCT activates the E-CODER)R900i and listens for the data logger to start
transmitting.
Figure 24 – E-CODER
®
)R900i™ Listens for Data
20
E-CODER
®
)R900 i ™ Installation and Maintenance Guide
Chapter 5: Data Logging Extraction