3. Click OFF CYCLE (option 4).
Figure 30 – Off Cycle Option
1. Type the read ID or the password.
2. Click LOGIN.
3. Confirm the date and time are correct.
4. Click YES.
Belt Clip Transceiver
To pair the Belt Clip Transceiver (BCT), complete the following steps.
1. Change date if you have a specific day to target.
2. Click INITIALIZE to pair with R900 BCT.
3. Type the MIU ID.
4. Click CAPTURE.
The transceiver captures reads in the same format as the data logger reads. The data logger
has 96 days of hourly reads and off cycle has 96 days of daily reads.
24
E-CODER
®
)R900
i
™ Installation and Maintenance Guide
Chapter 5: Data Logging Extraction
To Next Page
Loading...
