Setting Up the MRX920 Unit
MRX920/MTX950 User’s Manual 3-9
5 Gently close the window, positioning the antenna cable so
there is no pressure on it.
Inserting the USB Flash Drive
Neptune recommends that you insert the USB flash drive into the
laptop after you place the MRX920 unit in the vehicle.
Follow this procedure to insert the USB flash drive containing the
routes you plan to read.
1 Remove the cover from the USB flash drive.
2 Remove the dust cover from the USB port.
Pressure on the antenna cable can cause damage!
Neptune recommends that you use only the USB port located on the top plate of the
MRX920 laptop for meter reading.
To Next Page
Loading...
