USE AND MAINTENANCE MANUAL
NERONE MID
25
EN
4. RECEIPT AND HANDLING
4.1. EQUIPMENT RECEIPT
The device is delivered on a pallet and packaged with a strapped
cardboard.
Upon delivery, check that the packaging is intact and that it
has not been damaged during transport.
4.1.1. PACKAGING REMOVAL AND INSPECTION
Upon receipt of the equipment, proceed with its unpacking:
STEP ACTION
1 Remove the bands.
2 Remove the packaging cardboard.
3
Manually lift the oven to move it from the pallet an place it on a support structure.
Note: no.2 people are required to manually move the oven.
4 Remove the plastic covers and the user manual inside the cooking chamber.
After removing all packaging materials, check for any anomalies.
In case of anomalies, do not carry out the installation operations and contact the Manufacturer within 8 days from the date
of purchase, reporting the data shown on the identification plate of the equipment and any problems encountered.
4.1.2. PACKAGING DISPOSAL
The materials used for the packaging are recyclable and must be collected according to the regulations concerning separate
waste collection.
Separate the various packaging waste materials and dispose of them in compliance with
the regulations in force in the country where the oven is installed.
To Next Page
Loading...