USE AND MAINTENANCE MANUAL
NERONE MID
35
EN
8.3. PRODUCT LOADING AND COOKING
Do not leave the oven operating without containers or with empty containers.
8.3.1. PRODUCT LOADING
For cooking operations, place the tray on the grid inside the cooking chamber.
Only use trays and accessories specifically designed for this use, made with materials resistant to high temperatures and
suitable for contact with food.
8.3.2. SET A COOKING
To set a cooking, proceed as described below according to the model in your possession.
DIGITAL Version:
STEP ACTION
1
Press button for 2s to enable the oven operating cycle.
Note:the cooking temperature appears on the display (in °C).
2
Press buttons or to adjust the cooking temperature.
3
Press buttons or to adjust the cooking time.
4
Press button to start the pre-heating of the oven.
Note: the writing “PrEr iScA cALd” appears on the display for a few seconds, then the temperature appears in
real time accompanied by the writing “PrE”.
ITis forbidden to put items in the oven during the pre-heating phase!
Time and temperature can be changed during the pre-heating phase.
5
Press button again to skip the pre-heating phase.
Note: the oven passes to the cooking phase.
6
To end cooking press button .
To Next Page
Loading...