USE AND MAINTENANCE MANUAL
NERONE MID
47
EN
10.2.3. INTERNAL GLASS DISASSEMBLY / REPLACEMENT
The internal glass can be removed to facilitate cleaning operations or in case of damage.
In case of damage, recover the glass shards without releasing them in the environment.
Handle with care to avoid cuts.
To perform the disassembly / replacement of the internal glass proceed as described:
STEP ACTION
1 Open the door all the way.
2 Unhook the two spring stops of the internal glass.
3 Open the internal glass like a book with respect to the door.
4 Slowly remove the internal glass and clean and/or replace it with one possessing the same features.
5 To reassemble the internal glass, perform this procedure in reverse order.
1
2
3
To Next Page
Loading...
