Need help?Do you have a question about the Ness M1 Navigator and is the answer not in the manual?
General| Backlight | Yes |
|---|---|
| Power Supply | 12V DC |
| Housing Material | Plastic |
| Type | Keypad |
| Connectivity | Wired |
Displays current time, date, and arming status of the alarm panel.
Allows viewing of violated (unsealed) zones and navigation between them.
Displays any violated (unsealed) zones on the M1 Security controller.
Shortcut Function Keys for quick system operations, F1/F2 displayed, F1-F6 accessible.
Accesses alternative system menu functions from the main screen.
Screen for entering a valid authorization code to proceed with certain operations.
Control of automated functions like lighting, tasks, and outputs.
Allows viewing the current status of all security zones.
Temporarily maps the keypad to a different area for full control of that alternative area.
Provides details about the specific keypad hardware and its configuration.
Displays information related to the manufacturer of the security system.
Allows activation and management of automated tasks within the system.
Controls integrated lighting systems, including dimming and on/off states.
Manages system outputs, such as relays or other connected devices.
Screen for activating specific tasks programmed into the system.
Allows advanced users to activate tasks in a single view mode.
Provides a single view for controlling individual lighting items.
Allows adjustment of dimmable lighting levels from 0% to 100%.
Enables activation of outputs in a single view mode for advanced users.
Displays temperature readings from connected system temperature sensors.
Shows the temperature readings from connected HVAC thermostats.
Lists zones that were not successfully tested during the walk test.
Tools for installation and trained service technicians for diagnostics.
Functions for custom voice message recordings, set by the installer.
Disables the touchscreen for 10 seconds to allow safe cleaning.
To Next Page