NETGEAR FUSE - Wifi Connect Tab

WiFi Connect Tab
From the Connect tab of the WiFi page, you can configure access to your Main and Guest WiFi
networks.
1. In the Mobile Hotspot Manager, click WiFi > Connect.
You can:
● Edit the Main or Guest WiFi names and passwords.
● Turn the Guest WiFi network on or off. See Guest WiFi Network.
● Connect devices using WPS. See Connect Through WPS.
The following information is displayed.
Item
Description
Main WiFi
WiFi Name
This is the name that identifies your Main WiFi network and is visible to other WiFi-
enabled devices. See WiFi Options Tab.
WiFi
Password
This is the password that other WiFi enabled devices need to connect to the Main
WiFi network. See WiFi Options Tab.
WPS
Connect a device to the Main WiFi network using WPS. See Connect Through WPS.
Guest WiFi
Turn Off /
Turn On
Click this button to turn the Guest WiFi network on or off.
Note: The rest of the Guest WiFi fields / buttons appear only when the Guest WiFi
network is on.
Mobile Hotspot Manager (Browser) Interface 29
DRAFT