NETGEAR FUSE - Network Status Details

■ In the Mobile Hotspot Manager, click Settings > Network > SIM Security.
If the SIM has security enabled, SIM Security will be Active. Click Disable to disable SIM security.
The following information is displayed.
Network Status Details
This tab shows you details about the current mobile broadband connection (LTE).
■ In the Mobile Hotspot Manager, click Settings > Network > Status Details.
The information that is displayed depends on your current connection.
Item
Description
Status
Indicates whether you are connected to an LTE network.
Connection type
The type of address to be set Ipv4 or IPv6 or IPv4v6 (both).
PS service type
Indicates the LTE service type.
RSRP
The signal strength of the LTE network. (Reference Signal Received Power)
RSRQ
The signal quality of the LTE network (Reference Signal Received Quality).
RSRQ is the ratio between the RSRP and the Received Signal Strength
Indicator (RSSI).
RS-SINR
Signal to Interference Noise Ratio based on Reference Signals (narrowband
and wideband).
Mobile Hotspot Manager (Browser) Interface 50
DRAFT