■ In the Mobile Hotspot Manager, click Settings > Network > APN.
The list of all APNs that have been set up includes the following information.
The operator’s access point name (obtained from the operator).
Adjust the Access Point NI
Your device comes preconfigured with the Access Point Names (APN) for your Internet service provider's
LTE networks.
To add an APN for another network:
1. In the Mobile Hotspot Manager, click Settings > Network > APN.
2. In the blank line, enter the APN details:
Name – Enter a short description (for example, the carrier name).
APN – Enter the APN you obtained from the carrier.
3. Click the button beside the new APN entry.
To select the APN to be used:
■ Select the Active button at the beginning of the entry.
To remove an APN from the list:
■ Click the button beside the APN entry.
SIM Security
If you are using a SIM that has security enabled, you can disable SIM Security from this tab.
This tab shows the current status of this security feature (Inactive or Active), and allows you to disable
SIM security if it has been enabled.
Note: The SIM PIN is required to disable SIM Security.
Mobile Hotspot Manager (Browser) Interface 49
To Next Page
Loading...
