NETGEAR FUSE - WiFi Options Tab

You can:
● Edit the Main or Guest WiFi names and passwords. See Change the WiFi Network Name.
● Limit the number of devices that can connect to the Main and Guest WiFi networks.
● Configure your WiFi network’s connection parameters and security, and additional WiFi options.
Note: For some of these WiFi settings, if you change them, all connected devices will be disconnected
and have to reconnect after the settings are saved.
The following information is displayed.
Item
Description
Main WiFi
WiFi Name
This is the name that identifies your Main WiFi network and is visible to other
WiFi-enabled devices. See Change the WiFi Network Name.
WiFi Password
This is the password that other WiFi enabled devices need to connect to the
Main WiFi network.
Guest WiFi
WiFi network
name
This is the name that identifies your Guest WiFi network and is visible to other
WiFi-enabled devices.
Password
This is the password that other WiFi enabled devices need to connect to the
Guest WiFi network.
Generate a new
password each
time I turn on
the Guest WiFi
If selected, a random password is used each time Guest WiFi is restarted. See
Randomize the Guest WiFi Password.
Max WiFi
Max WiFi
You can limit the total number of WiFi devices (1-10) that can connect to the
Main and Guest WiFi networks. See Set the Maximum Number of WiFi
Devices.
Note: If you change Max WiFi the Main WiFi and Guest WiFi values adjust
automatically.
Mobile Hotspot Manager (Browser) Interface 31
DRAFT