Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Preparing Your Network C-13
December 2003, M-10177-01
DHCP Configuration of TCP/IP in Windows NT4
Once you have installed the network card, you need to configure the TCP/IP environment for
Windows NT 4.0. Follow this procedure to configure TCP/IP with DHCP in Windows NT 4.0.
• Choose Settings from the Start Menu, and then select Control Panel.
This will display Control Panel window.
• Double-click the Network icon in the
Control Panel window.
The Network panel will display.
• Select the Protocols tab to continue.
To Next Page
Loading...
Need help?
General