Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Firewall Protection and Content Filtering 6-11
December 2003, M-10177-01
Using a Schedule to Block or Allow Specific Traffic
If you enabled content filtering in the Block Sites menu, or if you defined an outbound rule to use
a schedule, you can set up a schedule for when blocking occurs or when access is restricted. The
router allows you to specify when blocking will be enforced by configuring the Schedule tab
shown below:
Figure 6-6: Schedule menu
To block keywords or Internet domains based on a schedule, select Every Day or select one or
more days. If you want to limit access completely for the selected days, select All Day. Otherwise,
If you want to limit access during certain times for the selected days, type a Start Time and an End
Time.
To Next Page
Loading...
Need help?
General