NETGEAR FWG114P User Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Firewall Protection and Content Filtering 6-13
December 2003, M-10177-01
Getting E-Mail Notifications of Event Logs and Alerts
In order to receive logs and alerts by e-mail, you must provide your e-mail information in the
E-Mail subheading:
Figure 6-7: E-mail menu
• Turn e-mail notification on. Select this check box if you want to receive e-mail logs and
alerts from the router.
• Send alerts and logs by e-mail. If your enable e-mail notification, these boxes cannot be
blank. Enter the name or IP address of your ISP’s outgoing (SMTP) mail server (such as
mail.myISP.com). You may be able to find this information in the configuration menu of your
e-mail program. Enter the e-mail address to which logs and alerts are sent. This e-mail address
will also be used as the From address. If you leave this box blank, log and alert messages will
not be sent via e-mail. Check “My Mail Server requires authentication” if you need to log in to
your SMTP server in order to send E-mail. If this is checked, you must enter the login name
and password for your mail server.

NETGEAR FWG114P Specifications

General

Brand	NETGEAR
Model	FWG114P
Category	Firewall
Language	English