NETGEAR GS110TP - ProSafe Gigabit Smart Switch

44 | Chapter 3: Configuring Switching Information
GS108T and GS110TP Smart Switch Software Administration Manual
The following table displays information about the global IGMP snooping status and statistics
on the page.
Field Description
Multicast Control Frame
Count
Displays the number of multicast control frames that have been processed
by the CPU.
Interfaces Enabled for IGMP
Snooping
Lists the interfaces currently enabled for IGMP Snooping. To enable
interfaces for IGMP snooping, see
IGMP Snooping Interface
Configuration on page 44.
Data Frames Forwarded by
the CPU
Displays the number of data frames forwarded by the CPU.
VLAN Ids Enabled For IGMP
Snooping
Displays VLAN IDs enabled for IGMP snooping. To enable VLANs for IGMP
snooping, see
IGMP Snooping VLAN Configuration on page 49.
VLAN Ids Enabled For IGMP
Snooping Querier
Displays VLAN IDs enabled for IGMP snooping querier.
IGMP Snooping Interface Configuration
Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings
on specific interfaces.
To access the IGMP Snooping Interface Configuration page, click Switching Multicast 
IGMP Snooping  IGMP Snooping Interface Configuration.