186 | Chapter 5: Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
MAC Binding Table
Use the MAC Binding Table page to view or delete the MAC ACL bindings.
To display the MAC Binding Table, click Security ACL, then click the Basic Binding
Table link.
The following table describes the information displayed in the MAC Binding Table.
Field Description
Interface Displays the interface to which the MAC ACL is bound.
Direction Specifies the packet filtering direction for ACL. The only valid direction
is Inbound, which means the MAC ACL rules are applied to traffic
entering the port.
ACL Type Displays the type of ACL assigned to selected interface and direction.
ACL ID Displays the ACL Name identifying the ACL assigned to selected
interface and direction.
Sequence No Displays the Sequence Number signifying the order of specified ACL
relative to other ACLs assigned to selected interface and direction.
To delete a MAC ACL-to-interface binding, select the check box next to the interface and
click Delete.
To Next Page
Loading...
