230 | Chapter 7: Maintaining the System
GS108T and GS110TP Smart Switch Software Administration Manual
The following table describes the information on the Dual Image Status page.
Field Description
Unit The unit ID of the switch is always 1.
Image1 Ver Displays the version of the image1 code file.
Image2 Ver Displays the version of the image2 code file.
Current-active Displays the currently active image on this switch.
Next-active Displays the image to be used on the next restart of this switch.
Image1 Description Displays the description associated with the image1 code file.
Image2 Description Displays the description associated with the image2 code file.
Click Refresh to display the latest information from the switch.
For information about how to update or change the system images, see File Management on
page 228.
To Next Page
Loading...
