GS700TS Smart Switch Software Administration Manual
Configuring Switching Settings 4-54
v1.0, June 2009
• Interface – Enter the interface to which the entry refers.
• Status – Select the MAC Address duration period status within the table. The possible
field values are:
– Permanent – Indicates the MAC address is permanent.
– Delete on Reset – Indicates the MAC address is deleted when the device is reset.
– Delete on Timeout – Indicates the MAC address is deleted when the Address Aging
Interval expires.
– Secure – Indicates the MAC Address is defined for locked interfaces.
2. Select the address table entry.
3. Enter the MAC Address and Interface in the provided fields in the first row.
4. Select the MAC Address duration period Status from the list in the provided field in the first
row.
5. Click APPLY to update the device.
Dynamic Addresses
The Dynamic Addresses screen contains information about the aging time before a dynamic MAC
address is erased.
To configure the Dynamic MAC Address table:
1. Click Switching > Address Table > Advanced > Dynamic Addresses. The Dynamic
Addresses screen displays:
The Dynamic Addresses screen contains the following field:
Figure 4-34
To Next Page
Loading...
Need help?
General