Model M4300-48X
The following figure illustrates the back panel of full-width model M4300-48X.
Figure 21. Back panel model M4300-48X
DescriptionNumber
RJ-45 RS232 console port1
PSU 1 with AC connector2
OOB port with port LEDs3
Bay for PSU 24
From left to right, the back panel of model M4300-48X provides the following
components:
•
Modular bay for power supply unit 1 (PSU 1), which is an APS250W.
•
Fixed fans for front-to-back air flow.
•
One RJ-45 RS232 (115200, N, 8, 1) console port.
•
One out-of-band (OOB) 1G Ethernet port with a left LED that indicates the speed
and a right LED that indicates the activity (see LEDs, M4300X series full 10G models
with RJ45/SFP+ combo ports on page 38).
•
Modular bay PSU 2 for an optional second PSU.
Hardware Installation Guide37Hardware Overview
M4300 Intelligent Edge Series Fully Managed Stackable Switches
To Next Page
Loading...
