NETGEAR M4300 Intelligent Edge Series User Manual

2
Hardware Overview
This chapter describes the switch hardware features.
The chapter includes the following sections:
• Hardware descriptions, M4300 series full 10G models
• Hardware descriptions, M4300 series 1G models with 10G uplinks
• Hardware descriptions, M4300 series full 10G models with RJ45/SFP+ combo ports
• Switch hardware interfaces
• Power supply units
• PoE power budgets
14

NETGEAR M4300 Intelligent Edge Series Specifications

General

Switch Type	Managed
Form Factor	Rack-mountable
Layer 3 Features	Static routing, RIP, OSPF, VRRP
Model	NETGEAR M4300 Intelligent Edge Series
Ports	Varies by model
PoE	Available on some models
Stacking	Yes
Redundancy	Redundant power supplies (on some models)
Management	Web-based, CLI, SNMP
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
Layer 2 Features	VLAN, STP, RSTP, MSTP
Security Features	ACL, 802.1X
Dimensions	Varies by model (see documentation)
Weight	Varies by model (see documentation)
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Power Supply	Internal
Warranty	Lifetime