EasyManuals Logo

NETGEAR M4300 Intelligent Edge Series User Manual

NETGEAR M4300 Intelligent Edge Series
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Hardware descriptions, M4300 series 1G
models with 10G uplinks
This section describes the switch hardware features for the following 1G models with
10G uplinks:
M4300-28G. Switch model with twenty-four 1G copper ports, two 10G copper ports,
and two 10G fiber ports
M4300-28G-POE+. Switch model with twenty-four 1G copper PoE+ ports, two 10G
copper ports, and two 10G fiber ports
M4300-52G. Switch model with forty-eight 1G copper ports, two 10G copper ports,
and two 10G fiber ports
M4300-52G-POE+. Switch model with forty-eight 1G copper PoE+ ports, two 10G
copper ports, and two 10G fiber ports
Front panel, M4300 series 1G models with 10G uplinks
The 1G models with 10G uplinks provide twenty-four or forty-eight 1000BASE-T
autosensing ports (depending on the model, either regular, non-PoE, ports or PoE+
ports), two dedicated 10GBASE-T ports, and two dedicated 10GBASE-X SFP+ ports.
The following figure illustrates the front panel of full-width model M4300-28G.
Model M4300-28G
Figure 9. Front panel model M4300-28G
DescriptionNumber
Power 1, Power 2, and Fan LEDs1
Stack ID LED2
10GBASE-T ports, each with a port LED3
OOB port with port LEDs4
Hardware Installation Guide23Hardware Overview
M4300 Intelligent Edge Series Fully Managed Stackable Switches

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4300 Intelligent Edge Series and is the answer not in the manual?

NETGEAR M4300 Intelligent Edge Series Specifications

General IconGeneral
Switch TypeManaged
Form FactorRack-mountable
Layer 3 FeaturesStatic routing, RIP, OSPF, VRRP
ModelNETGEAR M4300 Intelligent Edge Series
PortsVaries by model
PoEAvailable on some models
StackingYes
RedundancyRedundant power supplies (on some models)
ManagementWeb-based, CLI, SNMP
Switching CapacityVaries by model
Forwarding RateVaries by model
Jumbo Frame SupportYes
Layer 2 FeaturesVLAN, STP, RSTP, MSTP
Security FeaturesACL, 802.1X
DimensionsVaries by model (see documentation)
WeightVaries by model (see documentation)
Operating Temperature0° to 50° C (32° to 122° F)
Storage Temperature-4°F to 158°F (-20°C to 70°C)
Power SupplyInternal
WarrantyLifetime

Related product manuals