NETGEAR M4300 Intelligent Edge Series User Manual

Overview
The NETGEAR M4300 Intelligent Edge Series Fully Managed Stackable Switches consists
of a 16-port PoE+ full 10G model, 22-port, 24-port, 42-port, and 48-port full 10G models,
and 28-port and 52-port 1G/10G models that can also support PoE+. All ports on the
10G models are stackable. On the 1G models with 10G uplinks, the two or four 10G
ports are stackable. This installation guide is for the following models:
•
Full 10G models:
- M4300-16X. Full 10G switch model with sixteen 10G PoE+ copper ports in a
half-width chassis
- M4300-8X8F. Full 10G switch model with eight 10G copper ports and eight
10G fiber ports in a half-width chassis
- M4300-12X12F. Full 10G switch model with twelve 10G copper ports and twelve
10G fiber ports in a half-width chassis
-
M4300-24X24F. Full 10G switch model with twenty-four 10G copper ports and
twenty-four 10G fiber ports in a full-width chassis
•
1G models with 10G uplinks:
-
M4300-28G. Switch model with twenty-four 1G copper ports, two 10G copper
ports, and two 10G fiber ports in a full-width chassis
-
M4300-28G-POE+. Switch model with twenty-four 1G PoE+ copper ports, two
10G copper ports, and two 10G fiber ports in a full-width chassis
-
M4300-52G. Switch model with forty-eight 1G copper ports, two 10G copper
ports, and two 10G fiber ports in a full-width chassis
-
M4300-52G-POE+. Switch model with forty-eight 1G PoE+ copper ports, two
10G copper ports, and two 10G fiber ports in a full-width chassis
•
10G models with 10G RJ45/SFP+ combo ports:
-
M4300-24X. Switch model with twenty copper RJ45 ports and four 10G
RJ45/SFP+ combo ports in a half-width chassis
-
M4300-24XF. Switch model with twenty-two 10G fiber ports and two 10G
RJ45/SFP+ combo ports in a half-width chassis
-
M4300-48X. Switch model with forty-four copper RJ45 ports and four 10G
RJ45/SFP+ combo ports in a full-width chassis
-
M4300-48XF. Switch model with forty-six 10G fiber ports and two 10G RJ45/SFP+
combo ports in a full-width chassis
Hardware Installation Guide7Introduction
M4300 Intelligent Edge Series Fully Managed Stackable Switches

NETGEAR M4300 Intelligent Edge Series Specifications

General

Switch Type	Managed
Form Factor	Rack-mountable
Layer 3 Features	Static routing, RIP, OSPF, VRRP
Model	NETGEAR M4300 Intelligent Edge Series
Ports	Varies by model
PoE	Available on some models
Stacking	Yes
Redundancy	Redundant power supplies (on some models)
Management	Web-based, CLI, SNMP
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
Layer 2 Features	VLAN, STP, RSTP, MSTP
Security Features	ACL, 802.1X
Dimensions	Varies by model (see documentation)
Weight	Varies by model (see documentation)
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Power Supply	Internal
Warranty	Lifetime