NETGEAR MS510TX - Hardware Specifications

Hardware Specifications and Default Settings
348
Smart Managed Pro Switches MS510TX and MS510TXPP
Hardware Specifications
Table 74. Hardware specifications
Feature Description
Interfaces Nine Ethernet RJ-45 ports and one fiber SFP+ ports:
• Ports g1–g4. 1 Gbps Ethernet ports
• Ports mg5–mg6. 2.5 Gbps Multi-Gigabit Ethernet ports
• Ports mg7–mg8. 5 Gbps Multi-Gigabit Ethernet ports
• Port xmg9. 10 Gbps Multi-Gigabit Ethernet port
• Port xg10. Fiber port (SFP+)
Flash memory size 256 MB NAND
SDRAM size and type 512 MB DDR3 SDRAM
Switching capacity Non blocking full wire speed on all packet sizes
Forwarding method Store and forward
Packet forwarding rate • 1G. 1,488,000 pps
• 2.5G. 3,720,000 pps
• 5G. 7,440,000 pps
• 10G. 14,880,000 pps
MAC addresses 16 K
Green Ethernet • Automatic power-down mode on a port when the link is down
• Short cable mode
• EEE mode
Supported protocols and standards • TCP/IP
• UDP
• HTTP
• ICMP
• TFTP
• DHCP
• IEEE 802.1D
• IEEE 802.1 p
• IEEE 802.1Q
• IEEE802.3 1000BASE-T and 10GBASE-T
• IEEE802.3az (EEE)
• IEEE 802.3bz NBASE-T and MGBASE-T
• IEEE 802.1af (PoE)
• IEEE 802.1at (PoE+)
• IEEE 802.3ad Link aggregation (LAG with LACP)
• IEEE 802.1ab LLDP
• IEEE 802.1x RADIUS network access control