NETGEAR MS510TX - Add a Periodic Schedule for a Poe Timer Schedule

Configure System Information
83
Smart Managed Pro Switches MS510TX and MS510TXPP
If you select the Permanent radio button, the timer schedule continues indefinitely (or until
you change the settings) after you complete the configuration for the timer schedule. You do
not need to specify the date and time that the timer schedule ends.
If you select the Specific radio button, specify the date and time that the timer schedule ends
by doing the following:
a. Click in the Timer Schedule Absolute End Date field to display a calendar and
select the end date from the calendar.
b. In the Timer Schedule Absolute End Time field, enter the end time in the hh:mm
24-hour format.
9. Click the Apply button.
Your settings are saved.
For information about associating the PoE timer schedule with one or more PoE ports,
see Manage and View the PoE Port Configuration on page 55.
Add a Periodic Schedule for a PoE Timer Schedule
For each PoE timer schedule, you can add multiple periodic schedules that are repeated
every week while the PoE timer schedule is active. For each entry, you can specify the days
of the week and the start and end time that applies to all selected days.
A periodic timer schedule complements the PoE timer schedule. If you do not add a periodic
timer schedule, the PoE timer schedule is active continuously after you enable it.
 To add a periodic schedule for a PoE timer schedule:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 12.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System> Timer Schedule > Advanced > Timer Schedule Configuration.
The Timer Schedule Configuration page displays.
6. From the Timer Schedule Name menu, select the name of the timer schedule that you
want to configure.