NETGEAR Nighthawk RAX80 User Manual

Nighthawk AX8 8-Stream AX6000 WiFi Router
UseVPNtoAccessYourNetwork 129 User Manual
14. Click the Install button.
The window displays the progress of the installation and then displays the final installation
page.
15. Click the Finish button.
16. Unzip the configuration files that you downloaded and copy them to the folder where the
VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at C:\Program
files\OpenVPN\config\ by default.
17. For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:
a. On your computer, go to the Networks page. If you are using Windows 10, select Control
Panel > Network and Sharing Center > Change adapter settings.
b. In the local area connection list, find the local area connection with the device name TAP-
Windows Adapter.
c. Select the local area connection and change its name (not its device name) to NETGEAR-
VPN.

NETGEAR Nighthawk RAX80 Specifications

General

Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
WiFi Speed	6 Gbps
Bands	Dual-band (2.4 GHz & 5 GHz)
Processor	1.8GHz Quad-Core Processor
Ethernet Ports	5 (1 WAN & 4 LAN Gigabit ports)
USB Ports	2 x USB 3.0
Antennas	8 high-performance antennas
Security	WPA2/WPA3, VPN, Guest WiFi access
Memory	512MB NAND Flash and 1GB DDR3 RAM