Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Network Settings 63 User Manual
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select Guest Network.
The Guest Network Settings page displays.
4. Configure the following settings to set up a 2.4 GHz or 5 GHz guest WiFi network:
• EnableGuestNetwork. By default, the guest WiFi network is disabled. To enable the guest
WiFi network for the
2.4 GHz or 5 GHz WiFi band, select the Enable Guest Network check box.
• Enable SSID Broadcast. By default, the router broadcasts the SSID of the WiFi band so
that WiFi stations can detect the WiFi name (SSID) in their scanned network lists. To turn
off the SSID broadcast for the 2.4 GHz or 5 GHz guest WiFi network, clear the Enable SSID
Broadcast check box.
• Allow guests to see each other and access my local network. By default, WiFi clients that
are connected to the 2.4 GHz or 5 GHz guest WiFi network cannot access WiFi devices or
Ethernet devices that are connected to the main WiFi
To Next Page
Loading...
Need help?
General
