VPN Lite
101
VDSL Voice Gateway
The VPN lite Configuration screen displays:
6. Enter the information for one of the sites that you configured on the Telkom VPN Lite web
portal and the click Next button
Note: .The ampersand (&) character is not supported.
For the site that you are adding to your network, complete the following fields:
• Username. Enter the user name that you configured.
• Password. Enter the password that you configured.
• LAN IP/netmask. Enter the private and static IP address that you configured.
Note: The IP address for each site configured must be different and fall within
a different IP subnet range. For example, site1@evpn.lite.0001 can be
10.0.1.0/24. Then the IP subnet for site2@evpn.lite.0002 must be a
different subnet, like 10.0.2.0/24. The IP address must correspond
exactly to the one configured on the VPN Lite web page.
7. Review the configuration details and click the Finish button.
Your settings are saved.
Note: After clicking the Finish button, you might need to connect to your
gateway with the new LAN IP address entered when you configured
VPN Lite. Wait until the progress bar on the screen has completed
before attempting to reconnect.
8. Repeat this process for every VPN Lite site that you want to add to your network.
To Next Page
Loading...
