Manage Your Network
95
VDSL Voice Gateway
Set Up Remote Management
You can access your gateway over the Internet to view or change its settings.
Note: Be sure to change the gateway login password to a secure password.
The ideal password contains no dictionary words from any language
and contains uppercase and lowercase letters, numbers, and
symbols. It can be up to 30 characters. See Change the admin
Password on page 90.
To set up remote management:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The
default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select
ADVANCED > Advanced Setup > Remote Management.
5. Select the Turn Remote Management On check box.
6. Under
Allow Remote Access By, specify the external IP addresses to be allowed to access
the gateway’s remote management.
For enhanced security, restrict access to as few external IP addresses as practical.
Select one of the following:
• Only This Computer. Enter the IP address that will be allowed access.
To Next Page
Loading...
